Aging of ErT2 thin films: ERD analysis of mechanical property changes

Abstract

Rare earth tritide films evolve as tritium decays into 3He, which forms bubbles that influence long-term film stability in applications such as neutron generators. We followed the properties of model ErT2 films as they aged using ERD analysis to monitor T and 3He profiles, nanoindentation testing for mechanical properties and transmission electron microscopy to characterize bubble growth. The profiles of T and 3He are separately measured in ERD using a ΔE - E detector, taking advantage of the differences in energy loss within the ΔE detector. The composition measured by ERD followed the expected build-up of 3He up to near critical release, where 3He begins to escape from the film as bubbles overlap. These measurements complement observations of the changing mechanical properties of these films, where the observed behavior divided into two regimes: a substantial increase in layer hardness but elasticity little changed over 18 months, followed by a decrease in elastic stiffness and a modest decrease in hardness over the final 24 months. The evolution of properties has been explained by a combination of dislocation pinning by the bubbles, elastic softening as the bubbles occupy an increasing fraction of the material, and details of bubble growth modes. The ERD measurements confirm that the changes in properties are due to changes in bubble morphology and not to changes in 3He or T content.